DnA-70AA

The 70AA Series is a precision, yet versatile shaft encoder, machined from aluminium. Its 70mm frame size together with its integral servo-flange and front face mounting holes, make the encoder compatible with other industrial formats.

Body: Precision Machined Aluminium Cover: Precision Machined Aluminium (Powser Coated) Shaft: Stainless Steel Bearings: Ballraces Shaft Sealing: Sealed front bearing (shafts seals are available on request) Protection: IP65 Operating Temp: -20 to +85°C (depending on model) Maximum Speed: 6000 RPM (Higher on request) Torque: 2.35Ncm (typical) Inertia: 100gcm2 (typical) Shaft Loading: Axial = 10N (max) Radial = 10N (max) Cable: Screened, oil and salt water proof Impulse Frequency: Up to 300KHz (depending on model) Current Consumption: 60mA (typical - without load)